Do you have the stock rear end in it? With the weak half shafts? Could be trouble with the new HP
For sure some differential and half shafts upgrades coming soon! The 3.07 gears have to go!! looking into 3.73 gears, think I would like to build a single turbo set up over next winter. Just some cruising for this summer, hope to get by with all the stock differential set upDo you have the stock rear end in it? With the weak half shafts? Could be trouble with the new HP
275/40 ZR17Wow, those tires are pretty! and clearly MUCH superior to a Gatorback! It looks too wide to be a 245. is that a 275?
I noticed in that picture that the hood is on. So it's an official go for Ponoka then?
Really nice job on the swap! I'm super impressed and will be calling you when I swap a 5.3 into my S-15.
Cool it's like an old cyclone. You putting ground effects on it too?
Car is 9.9 but would be 10 out of 10 with C4 ZR1 wheels (painted) or early C5 zo6 wheels in competition grey with the C5 caliper/and rotor upgrade. Only my opinion but saw blades and salad shooters look too much like wheel covers. Again "only my opinion"! I lust after your paint!!!!!
I will be there! you meeting up in Red Deer to go to Ponoka?I noticed in that picture that the hood is on. So it's an official go for Ponoka then?
Really nice job on the swap! I'm super impressed and will be calling you when I swap a 5.3 into my S-15.
No, it's the A&W on Gasoline Alley East SideMan, I need an alert to when people ask me questions so I don't leave them hanging!
I'm planning on meeting at the A&W in the morning. It's the A&W on the corner-ish of Gaetz ave and 19 Street, correct?
Man, I need an alert to when people ask me questions so I don't leave them hanging!
I'm planning on meeting at the A&W in the morning. It's the A&W on the corner-ish of Gaetz ave and 19 Street, correct?
Where are you putting the turbo? Not much room in a C4 engine bay for anything.
Going to be a tight fit, but should be a fun build!!
Cant wait to get started
Where are you putting the turbo? Not much room in a C4 engine bay for anything.