This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

Jacking pucks

Dik said:
Oh geez. This is news to me! Thank you EJ, Axe.

.... I am leaning towards Rruuff's solution....
Click to expand...

Tip if you do Dik. Nice slow taper for the entry ramp and glue or staple that non-slip liner material to the bottom to keep them from sliding forward as you drive up to them. First time is tricky to get them in the right spots and aligned square. I drew guidelines for positioning after I got them right the first time. Easy breezy now.
 
What a great idea, i'm going to make some!!
 
Reactions: Rruuff Day
Roughrider said:
What a great idea, i'm going to make some!!
Click to expand...

Here's a better look at my home-made tire pads... Only thing I would have done different (and I may remodel them a bit this fall), is flatten the drive up taper a bit... Last pic is the non-slip stuff on the bottom. I don't have a patent on these so no royalties involved.. Unless you want to of course....





 
Reactions: hemicat, 12cents and Roughrider
Roughrider said:
How wide ? About 16-18" for some wiggle room.
Click to expand...

Any of the stryrofoams would work in my opinion. Mine is the lower density white but it seems to hold up well. Just happened to be what I had laying around. Mine is 14" wide but 16 to 18 would be better as first time around, i was on and off a few times to get all 4 tires in the right place. Once I had it right, I black markered the corners on the concrete... All good now...
 
Reactions: Roughrider
You must log in or register to reply here.

Similar threads

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Menu
Log in
Register