Went for an Excursion..

Valve stems don’t line up, lol.

My valve stems are tucked in between my spokes and are hard to reach. I did a check the other day and can't properly fit my tire gauge on the fitting. My pressures were between 188 kPa and 32 psi and my Bentley was at 44-47 for comfort. IYKYK...
 
My valve stems are tucked in between my spokes and are hard to reach. I did a check the other day and can't properly fit my tire gauge on the fitting. My pressures were between 188 kPa and 32 psi and my Bentley was at 44-47 for comfort. IYKYK...
Hmmm…..Bentley . Posh… Was there no way to mount the tires so there was access to the valve ? Seems odd .
 
Ok I get it, running parallel to the 401. I drove on 27 to Barrie on the way to Port Severn instead of the 400. Tired of the congestion and saw new landscape...
I use 27 all the time. Its a bit slower, but the scenery is worth it. Also if we get back from travel late night there is basically no traffic from Pearson to Barrie.
 
Came back from my 3 day excursion to Tremblant beginning of the week.
Return trip on hwy 60 through Algonquin Park. Long drive but worth it. They just finishing up paving coming out of Renfrew.
It was difficult find any 93 or 94 gas up there.
 

Attachments

  • 20250723_111507.webp
    20250723_111507.webp
    840.6 KB · Views: 21
  • 20250723_105124.webp
    20250723_105124.webp
    1.1 MB · Views: 22

Similar threads

Users who are viewing this thread

Back
Top