TPI swap update!

Nelson84 · Jul 23, 2016

I started taking apart my TPI and got a good look at the mouse house.

I pulled it all out.

I have a question? What is this sensor on the bottem of the plenum and does it need to be plugged in? I have no check engine lights and it runs strong? Is it emissions or something? I don't see a plug around it but it might be tucked away somewhere and someone forgot to plug it back in.

Nelson84 · Jul 23, 2016

Is it normal for a TPI plenum and runners to be that dirty inside? Lots of black crud I am swapping in new runners and plenum that are super clean. I was thinking I should gain a little more air.

I also found the screens still in the MAF, I will cut them out too.

Riley P · Jul 25, 2016

I would imagine it would be pretty normal for the plenums to be dirty. As for the plug on the bottom side of the plenum, I am all ears waiting to hear what that is for.

Nelson84 · Jul 26, 2016

Figured out it's an air temp sensor. I found mine relocated to the air cleaner area to get a cooler temp read for better performance to trick the computer

Riley P · Jul 28, 2016

Excellent. Good to hear it's nothing critical that was not hooked up.

TPI swap update!

Nelson84

Nelson84

Riley P

Nelson84

Riley P

Similar threads

Users who are viewing this thread