Got a C4 and a 3d Printer? Well...

[Tourmax]

All free downloads.

Headlight motor gear:

GM Saturn Pontiac Corvette pop up headlight motor gear by Usagoal

This is the worm gear for the pop up/flip up headlight motor on my 96 saturn. It's common for these gears to strip their teeth rendering the headlight motor unusable. Replacement gears are available in brass, aluminum and plastic (i've heard the aftermarket plastic gears also strip out fairly...

www.thingiverse.com

headlight knob:

C4 Corvette Headlight Knob by Cellularr

I made this for my C4 Vette as I was tired of the OEM one falling off due to loose fitting. This part requires a little force to put on, but it is all good as the fit is tight. This surely beats spending around $20 online for an OEM one. Happy printing and let me know how it goes!

www.thingiverse.com

C4 Corvette Headlight Knob remix:

C4 Corvette Headlight Knob remix by gamekiller7

https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.

www.thingiverse.com

door vents:

Corvette C4 side window air vent (updated) by blue-v

Now in 1:1 original size. Sorry for wrong scaled thing! This is a replacement part of the Chevrolet Corvette C4 (1983-1996) air outlet for the side windows. These parts are made from plastic and tend to break when they get older. So did mine on my '88 convertible. As I found no original or...

www.thingiverse.com

Cup/Phone holder:

C4 Corvette Phone CupHolder by Chbtransam

Hello I was looking to hold my iPhone 8 Plus while driving my 1984 C4 Corvette. I have designed this cupholder which fit exactly in the C4 Corvette cupholder. The design was made in Fusion360. For print process i've made a "filament change" to make the Corvette brand and Logo visible. This up to...

www.thingiverse.com

Delco Bose emblem:

C4 Corvette Delco Bose Radio Emblem by mpk944

Delco Radio Emblem for C4 corvette radios. Made this for my radio after adding Bluetooth. Turns out its too small to print on my machine but may work with better programming.

www.thingiverse.com

1996 C4 Corvette Convertible Upper Window Support Spacer:

1996 C4 Corvette Convertible Upper Window Support Spacer by gdl2165

I had the convertible top replaced on my 1996 C4 Corvette and it ended up just a little bit low, causing it to slip down off the upper support pads. I designed this upper window support spacer, just a little bit wider than OE and it solved my problem.

www.thingiverse.com

C4 Corvette Targa Top Storage Holder Cover:

C4 Corvette Targa Top Storage Holder Cover by sunsetvette

I just completed the Targa Top Storage mount Cover. It goes along with the mount that I drew up. https://www.thingiverse.com/thing:4741298 I printed it out of TPU because it will take the heat and if you smack it, it's not going to crack or break.

www.thingiverse.com

C4 Corvette Power Seat Control Light Covers:

C4 Corvette Power Seat Control Light Covers by gvlgvl

Download files and build them with your 3D printer, laser cutter, or CNC.

www.thingiverse.com

C4 Corvette hood prop rod end:

C4 Corvette hood prop rod end by jayjones

I've printed this is PLA and resin and they both work fine, although it seems like the resin is more heat resistant

www.thingiverse.com

C4 Corvette Coolant Tank Insulator 14104598:

C4 Corvette Coolant Tank Insulator 14104598 by belairbrian

This goes between the coolant tank and bracket. Printed in TPU for flexibility

www.thingiverse.com

C4 Corvette Targa Top Storage Holder:

C4 Corvette Targa Top Storage Holder by sunsetvette

My garage queen 1990 Corvette was needing a new top, after getting stuck by Ecklers I sent my original top off to Astro Tops to be rebuilt. They were a great company to work with and the top is better than new (Feb 2020). In the spring when the roads were clear of gravel I took her out, it was...

www.thingiverse.com

C4 CORVETTE DOOR DEFROST VENT:

C4 CORVETTE DOOR DEFROST VENT by mcmxgta

-Redesign of the door defrost vents for an early C4 Corvette. -Blank area in center open for customization if desired. -Should fit years 84-89.

www.thingiverse.com

C4 Corvette Seat Track Transmission shaft end:

C4 Corvette Seat Track Transmission shaft end by slvrshrk

I designed these as direct replacements for the nylon shaft ends found in the Corvette C4 power seat transmission. These commonly break from people getting in and out of the seats. When I looked further, I saw that by extending the length of the cap it would rest against the metal case and...

www.thingiverse.com

Hood prop rod end for C4 Corvette:

Hood prop rod end for C4 Corvette by jayjones

I printed in PLA @ 200c nozzle and 60c bed

www.thingiverse.com

C4 Corvette Rear Curtain Clips:

C4 Corvette Rear Curtain Clips by sunsetvette

Replacement clips that hold the rear deck cover for 84-96 corvette coupes.

www.thingiverse.com

C4 Corvette Delco Radio Bracket:

C4 Corvette Delco Radio Bracket by mpk944

This is the bracket that holds the radio into the center console (1 per side).

www.thingiverse.com

C4 Corvette Offset Cup Holder Adapter:

C4 Corvette Offset Cup Holder Adapter by PaulVette

Coffee Cups were smaller back in the 90s. None of our newer travel cups fit in my cup holders.

www.thingiverse.com

 

[Jeffer2013]

sounds like a good small business for you

 

[Tourmax]

sounds like a good small business for you

Those aren't mine, just passing it on.

 

[VikingTrad3r]

very cool. thnx for sharing.