- Thread starter
- #2,281
They have been doing Z06 CTF's, but I doubt they'd do that many back to back. Not enough motors for that.
Current BG production estimate
- Thread starter Murray20c8
- Start date
CamsC8
Power User
Unless they built up a bunch saving them for this particular day?
- Thread starter
- #2,283
Ya never know, but they are still in the testing phase. In production they won't do that many in a day.
Hi guys, I have a TPW of July 18 and received my VIN too. What can I expect as the likely delivery date to Ontario. Need to sell my other car to make room. Is 3 weeks after production a reasonable estimate?
Also, now that I have the VIN, what info can I get with it?
Also, now that I have the VIN, what info can I get with it?
- Thread starter
- #2,285
3 weeks should do it, but there are other factors. I'd wait until it's at 4000 (Ready to ship) before I'd make any concrete plans. That is if you need your current vehicle. Some cars get bayed for quality control. Others waiting for a carrier and still others wait ant Ingersoll for a ride. What is your dealership? That also can make a difference
Thanks. Bill Spencer.
- Thread starter
- #2,287
It will likely make a stop over in Ingersoll, but usually only for an hour or 2 as it gets transferred to a different hauler. But that isn't always the case as sometimes JCT goes al the way to Coburg and sometimes it sits in Ingersoll for a couple of days. Still 1 to 3 weeks is a good target.
Shariz, I just heard a car built last Wed morning June 29th, arriving at a dealership in West Toronto at 5pm yesterday. So it took about 8 1/2 days from coming off the line to delivery at the dealership.
Toronto is usually next day delivery after loading at the Corvette Plant.
Cobourg may require an offload in Ingersoll, but the last time I spoke to one of the Jack Cooper drivers he said they were going right through to Ottawa at that time. Spencer's should be able to give you an update on the recent deliveries if they came straight from Bowling Green.
- Thread starter
- #2,289
Great point. The dealer is usually the best source for info (dealership depending of course LOL)
gone
Power User
With your VIN, you can get an insurance quote and register with the Ron Fellows driving school in Nevada, which is something you should seriously consider attending with GM’s subsidized rate for new Corvette owners. Congrats on your soon-to-arrive wheels and post photos!
DenisC8
Power User
The Q9A wheels for 70th Anniversary package are not on constraint anymore and 90% of Z51 orders can have mag ride
Have a TPW this week. My vin is 5141, so thinking it might be built on Thursday July 14th. I expect delivery via Ingersoll and then to dealer in Ottawa area. Recent deliveries have been very quick, 6-10 days. Getting close!
- Thread starter
- #2,293
7/11 (They usually start a little slower coming back from any down time.)
4582 > 4735 = 154
4582 > 4735 = 154
- Thread starter
- #2,294
7/12
4736 > 4909 = 174
4736 > 4909 = 174
- Thread starter
- #2,295
7/13
4910 > 5088 = 179
4910 > 5088 = 179
Thanks for keeping me informed about the progress of the daily production numbers. With a vin of 5141, my car was built this morning July 14th. Hopefully the wait to have it delivered to the dealer will be short. Thanks again Murrayc8for posting.
- Thread starter
- #2,297
7/14
5089> 5267 = 179
5089> 5267 = 179
- Thread starter
- #2,298
7/15
5268 > 5455 = 188
5268 > 5455 = 188
CamsC8
Power User
Murray I'm now back to paying attention to your stats...lol.
And the fun begins all over again. @Murray20c8 will you be breaking out the list to indicate the different variants they build?