battery tender connection points

[hemicat]

This video suggests permanent connection points for a battery tender on C5. I have just been connecting it to the battery posts directly but may consider this option.

 

[Bixter44]

This video suggests permanent connection points for a battery tender on C5. I have just been connecting it to the battery posts directly but may consider this option.

Thanks for posting this. I will do a modified version of it. Good idea.

 

[Kerf]

Ditto.

 

[AxeZ06]

Had this setup forever on every m/c I've owned.
I don't understand that ground, but whatever.
I would wire up direct to the battery....easy peasy.

 

[Bixter44]

Had this setup forever on every m/c I've owned.
I don't understand that ground, but whatever.
I would wire up direct to the battery....easy peasy.

I like batteries to only have factory cables on them. Especially side post.
Grounds are hard to come by on a fiberglass car, so I am assuming the ground he is illustrating here was the closest one around. But I will be looking for another.

 

[AxeZ06]

I like batteries to only have factory cables on them. Especially side post.
Grounds are hard to come by on a fiberglass car, so I am assuming the ground he is illustrating here was the closest one around. But I will be looking for another.

Same here re adding wires to the battery terminals. But, the eye rings that come with a Tender Jr can't be more than 1/32" (just looked at mine....took a pic) Space isn't an issue, install is simple.

If y'all run it similar..... Don't forget to use an inline fuse, if it's not supplied.

 

[Z16Jim]

I just finished doing this mine, the battery was already out so it didn't take long to install. The cable that came with the battery tender had a built in-line fuse.