My Apologies for reviving an extremely old post of mine, I hadn't touched this car in over 2 years and barely drove it in the last 5! But I've finally fixed my turn signal issue after many years and 2 kids later.
Problem Recap:
Front turn signals wouldn’t work, but rear ones did. Stored codes...
I just placed an order last week for a bunch of oil, air and cabin filters for my cars. I was not charged anything extra at delivery beyond what i paid Rock Auto. Package was dropped off in front of my door.
I could be wrong but I have part numbers GM 10402716 or AC Delco 25981210 for 97-00's
Alternatively you could consider what I did when I got new wheels and upgrade to the 01-04 TPMS's you'll need to swap out the remote door lock receiver and get new key fobs, but upside if you'll be using 01-04...
Just an update, i had some time over the long weekend so i replaced the bulb sockets (looks like one of the sockets had already been replaced before)...pretty straight forward process, 3 wires to connect from the new socket to the existing harness. Also replaced the hazard flasher which was a...
Maybe we can start checking with manufacturers and see if we can have a replacement part in production...sounds like there's a market for it to capitalize on
I've done some research on this in the past...My memory is a little bit hazy but my understanding is that the SWPS is a rotary encoder, in very simple terms, it reads the angle of the steering wheel and returns some value to the EBCM. It has a 5V input and I believe 3 outputs between 0-5V...
@Jeremiad Thanks for the information.
I did happen to pull the bulbs again after the post, the contacts didn't look corroded or anything, I hit it with some electrical cleaner spray while I was at it just to try. I did notice some discolouration on parts of the plastic that hold the bulb in...
Hey guys,
Not sure if anyone has come across this or has any ideas but my front DRL/turn signal acts up intermittently
I have the LED switchback bulbs which worked perfectly fine for a couple years and last year i got some newer switchback LEDs and that's when i started noticing some issues...
Thanks everyone!
@Black 03 Z06: You could definitely apply them now, just make sure the lens surface is clean
@Riley P: At some point when I was looking into them they were discontinued and only cheap knock-offs were available but it seems Radioflyer has been able to source new suppliers to...
Modified Hi-4 Mod
This mod makes the low beams stay on when you switch to high beams. With the Radioflyer bi-xenon headlights this mod definitely holds more value otherwise the bi-xenon will not work. Essentially this mod sends the high beam signal to the low beams thereby keeping the lows...
Headlight Gear Fix
Parts Needed
- Metal or plastic replacement gear (I went with a metal gear from Brent Franker which is one solid metal piece replacing both the plastic gear and rubber grommet)
- OPTIONAL: Bump stop replacement (OEM or I purchased from Rodney Dickman, this is optional but...
I spent some time last week on this headlight project and tried to document everything. I hope this helps someone or at the very least you'll enjoy the process. I figure I would combine these into one thread rather than have separate threads for each mod. There's some overlap in the steps and...