Recent content by kacey62

  1. K

    anyone aware of shop or person who rebuilds the 57 - 65 Rochester fuel injection units?

    Talked with Gary and he no longer works on these as parts are difficult to obtain in Canada. He ships to a contact in Washington State for service/ rebuild so will do that. Thanks for the leads on this. Will report the outcome Ken
  2. K

    anyone aware of shop or person who rebuilds the 57 - 65 Rochester fuel injection units?

    Thank you , will try both of these contacts. If any success in locating a qualifies source I will post it here.
  3. K

    anyone aware of shop or person who rebuilds the 57 - 65 Rochester fuel injection units?

    anyone ware of shop or person who rebuilds the 57 - 65 Rochester fuelinjection units in Canada preferably in western area?
  4. K

    Internet News Torch Red C8 Corvette Joins Hallmark’s 2021 Christmas Ornament Collection

    Well, full circle the very first one 20 odd years ago was a red 57 if memory correct.
  5. K

    Wonderbar radio and speaker dilemma

    Hi Tom, just had my radio reworked and now utilizing the same speaker. had FM and extra input added as well. Not in car yet but sure sounded great on the bench! Had it done in Mission B.C. by Larry Woods Radio. Also the 14 inch measurement for the FI air filter bracket was exact, thankyou. Ken
  6. K

    Vancouver Island Corvette Group - Facebook Page

    agree with all above, facebook is nothing but a total invasion of our minds! The original intent has been long lost, and now nothing but a money grab for one of the richest people on the planet. Also messing with peoples minds regarding elections. Just my opinion.
  7. K

    Question Does anyone know what is behind the corvette emblem in between the exhaust pies? Is it the fuel tank ?

    Not sure what area you are referring to. My 03 had an emblem between the exhaust pipes on the outside of the car. They were an aftermarket thing. small metal plate about 4x6 inch, painted body color with the 50th anniversary emblem attached ?????
  8. K

    62 Diff Bearing

    Hi Bob, can be a no fun job ! I have had to resort to attaching a length of chain to one of the wheel bolts and by "whipping " the chain it snaps the bearing loose from the housing (assuming of course that the four retaining bolts are out) On another note, I'm replacing the lens on the tach...
  9. K

    C1 anybody who has switched from a T10 transmission to a Tremic TKO

    Hi Mr C, I am not sure the newer TKX will fit without modification. If the info I have is correct it is physically bigger, would have to check with Silver Sport or one of the Tremec elite dealers for confirmation. Also need to know if shifter relocation possible. Unless you have a heavily...
  10. K

    C1 anybody who has switched from a T10 transmission to a Tremic TKO

    Have been thinking about going that route as I have installed the TKO500 in a c2, and know of few friends that are very happy with their installation in their C1's. Depending on your rear end ratio (3.70 - 4.10) it can make highway driving much more comfortable with overdrive keeping engine RPM...
  11. K

    Question looking for correct placement of bracket to attach air cleaner on 62 fuelie. require measurement from firewall to center of the riveted bracket on upp

    Hi Tom, that seems to be right. It would put the filter hose in direct line with the air meter. Will slide the chassis under the hanging body to be sure before riveting. Thanks
  12. K

    Anyone with a 1962 interested in joining a survey count of remaining cars?

    I'm interested, who is going to collect the info ? I have vin # 20867S101643. Originally from California.
  13. K

    Question looking for correct placement of bracket to attach air cleaner on 62 fuelie. require measurement from firewall to center of the riveted bracket on upp

    Thanks Tom, that sounds about right. Will check the car on the weekend.
  14. K

    Question looking for correct placement of bracket to attach air cleaner on 62 fuelie. require measurement from firewall to center of the riveted bracket on upp

    Much appreciated, thank you. If your friend could get the measurement it would be very helpful.
  15. K

    Question looking for correct placement of bracket to attach air cleaner on 62 fuelie. require measurement from firewall to center of the riveted bracket on upp

    anyone with a 58-62 fuelie that can help me find the distance from the firewall to the aircleaner attaching pad? Replacing left fender and inner and no longer have the old pieces to compare. Was told it was about 16 in from firewall but that does not seem right. If I could get a measurement from...
See more
Top Bottom