Recent content by George

So this is the #3 passenger side mount, it is the worst of the four so I had to cut the hole thing out, sorry its rough had limited tools to do it. Just wanted to see if anybody else has done it this way, am planning on bending some 3/16 plate to conform to the existing channel and plug...

I have a 78 that i am I'm running 1400 series Edelbrock carbs on a C-26 Edelbrock quad intake and getting rid of the charcoal canister. Do i need to run a return line to the tank, and will I need to set up some sort of vent on the tank were the return and charcoal canister used to be hooked to...

Getting close to putting the body back on the chassis, so pressure washed the underside, so pulled the console as I am replacing/rebuilding the e-brake and shifter. Was wondering what people are using for an undercoat, it seems to currently be a mix of 2 paints and some textured undercoat...

Guess it comes down to I know that they are there and how picky do i want to be.:cool:

So it was the Mile Zero Cruisers car show this weekend, and took the start of my 78 down. Had good feedback, as most people only see the finished product. One thing I was wondering about and I cant remember when i took the old motor out, is if the bell housing bolts were flanged of not. I ended...

Am slowly getting things back together, but had a fitment issue with the drivers side brake. The spindle and chassis are from another car, but the caliper bracket and the caliper are from my original car. When I tightened the caliper it pull so far to the inboard side that I had a gap on the...

Was wondering if anybody has the tach/ speedo cluster apart on a 78, looking for the diameter of the opening of were the gauges sit. thanks George

check V8TV on you tube they put 47-53Chev truck gauges from Dakota into a 77 vette, and yes you can get them in metric

thanks for the info, just glad its apart now, I've never seen a Berlina before, cool looking car. did see an early 70's station wagon which I have seen before on face boo marketplace recently. have a good week George

So its off, called western corvette in Calgary to see if they had any shorter straps, which they don't, so Jason asked how my sewing skills are. Knowing how mine are, I declined to sew them myself, luckily we still have a cobbler in town so we did a double overlap and took 2 feet out of the...

So had some time off, and figured I'd better get at removing the body from the chassis. So built this frame to lift it, ordered the sling to make it easier, then realized I need more height, so I added the A frame part of it. Quickly realized even though I have14' ceilings at the peak the sling...

I have a battery cut off switch connected to mine, but it is a pain in the butt to remember to turn it off.

man, I wish I had your energy

am also currently running the 18" nitto invo tires seem to be a fairly sticky tire

There is also western corvette in calgary.