This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

Replacing Exhaust 06 C6

Postie

Active Member
Feb 28, 2009
131
0
Cold lake, Alberta
VetteCoins
600
Have a few questions Manny and guys of crse... ref taking the old stock system off and puting the new one on. From after the cats. Putting on Magnaflow all the way back to include X Pipe, sorry if these questions were raised before.

1. Does the battery have to be disconnected at all? I don't see why but.
2. I've read where it's better to take off the sway bar in the rear, is that req to get the OEM mufflers off and new in place?
3. Have you found any difficulties that I should be aware of so it's makes the transistion smoother. Wd to loosen the bolts and such, will i have to use a cut off wheel to clear the old system , that sort of thing. This weekend the new system goes on. Can't wait either. Finally some good sound comming up!!
 

No you do not have to disconnect the battery
Yes , remove the sway bar where it is connected to the cradle,
(2) 18mm nuts and (2 )18mm , Drop it down and it will make this a breeze.
This is a straight bolt in, and you will not need to cut or weld anything.
I always spray on some WD to loosen the bolts .

Any problem's just call me and I will guide you through 416-873-1779

I'm sure you will be just fine

Lets see and hear it when your done.

Thx
Manny@E.C.P
 
Thats Great Manny, Tks I will have your number handy, ya never know. Appreciate you giving it and the advice, always good to ask way before hand. I'm excited as to how she'll sound, so yes before and after vids, as well as the change over a few pics.
 
I have to agree, I just love Bolt on stuff that we can do on our own. Almost easy peasy. But your right the difference is always what we all get out of what we add on. Headers with high flow cats will be the next on the list to do. It keeps adding up, the money that is. lol
 
Well it was nice the last few weeks, hence thought I could get started. Just one of those alberta clippers, well from the Arctic mind you. It'll be all gone by thursday. But Just bought the Tunnel Plate package from Manny and figured I'd change that up when the old system is off, before the new. So maybe the week after.
 

Similar threads

Users who are viewing this thread