Quickjack TLX Canada ?

vacek

vacek

Regular
You're Liked You're a Regular C8 Completionist Award
Apr 3, 2024
206
305
VetteCoins
6,390
Car
22’ C8 Corvette 2LT
Province
NB
So I purchased a Quickjack 7000TL from Costco, arriving tomorrow , for $1499 + tax on sale … great deal

However , just realized that it won’t reach front & back jackpoints on my C8. My bad for not paying close enough attention. But easily returned, tomorrow.

So now I’m after a 5000,6000 or 7000 TLX , but ouch, can’t find a deal anywhere. The 5000tlx is available at Walmart USA for $1575 .. which would be about $2500 Canadian all in for me and an hour drive to pick it up.

Any other options anyone is aware of, with shipping to NB ? In Canada …..

Thanks in advance
 
Last edited:
  • Informative
Reactions: 1st Vette
vacek said:
So I purchased a Quickjack 7000TL from Costco, arriving tomorrow , for $1499 + tax on sale … great deal

However , just realized that it won’t reach front & back jackpoints on my C8. My bad for not paying close enough attention. But easily returned, tomorrow.

So now I’m after a 5000,6000 or 7000 TLX , but ouch, can’t find a deal anywhere. The 5000tlx is available at Walmart USA for $1575 .. which would be about $2500 Canadian all in for me and an hour drive to pick it up.

Any other options anyone is aware of, with shipping to NB ? In Canada …..

Thanks in advance
Click to expand...
Two lengths of 2x4 hardwood. Or 2x6 . Cheap, easy and effective.
 
vacek said:
On top of the 7000tl ?
Click to expand...
Just place them against the frame and then the lift points on the “ hoist “ go against the bottom of the 2x6 . Very solid very cheap. Not like it’s something you’d be doing that often. Saves packaging it up for return and getting another unit. I always have been a fan of the KISS principle. ;)
 
  • Like
Reactions: vacek
1st Vette said:
Just place them against the frame and then the lift points on the “ hoist “ go against the bottom of the 2x6 . Very solid very cheap. Not like it’s something you’d be doing that often. Saves packaging it up for return and getting another unit. I always have been a fan of the KISS principle. ;)
Click to expand...
Appreciate that
 
  • Like
Reactions: 1st Vette
  • Like
Reactions: vacek
Dave91TM said:
If I took my $100,000.00 plus car to a mechanic that said, "my hoist is too short I'll just use a couple a 2 x 6's to shim it up", I think I would run away!
Click to expand...
Quick Jack will sell you basically the same thing for $380 USD . The lift point on the 7000 TL is only a couple of inches off at the most. The hardwood 2x6 would work just as well. He’s not going to a “ shop “ this is in his own garage. Big difference . Frame Extensions (https://www.quickjack.com/frame-extensions/)
 
Last edited:
vacek said:
So I purchased a Quickjack 7000TL from Costco, arriving tomorrow , for $1499 + tax on sale … great deal

However , just realized that it won’t reach front & back jackpoints on my C8. My bad for not paying close enough attention. But easily returned, tomorrow.

So now I’m after a 5000,6000 or 7000 TLX , but ouch, can’t find a deal anywhere. The 5000tlx is available at Walmart USA for $1575 .. which would be about $2500 Canadian all in for me and an hour drive to pick it up.

Any other options anyone is aware of, with shipping to NB ? In Canada …..

Thanks in advance
Click to expand...
www.quickjack.com

Frame Extensions

QuickJack’s TL frame extension kit increases the lift point spread of the 5000TL, 7000TL, BL-5000SLX and BL-7000SLX by 6 inches. Sold as a pair, these easy-to-use, removable adapters require no setup whatsoever. They’re rugged, lightweight and give a TL or older SLX model the same reach as an...
www.quickjack.com www.quickjack.com
 
I have a QuickJack box #3 for sale -includes literally everthing except the lift frames-still in original box-never even unpacked -sent to replace damaged first shipment which i finally had repaired then replacement box showed up months later -make an offer-useless to me. Make a reasonable offer and pick it up- -$550??-Barrie Ont. Reply [email protected]
 
  • Like
Reactions: 1st Vette
vacek said:
Ordered a 7000tlx , just so I and everyone thinking about it can sleep better tonight :)

Costco is a simple return of the tl

Appreciate the reply’s, but don’t want to addd parts and pieces to make it work
Click to expand...
Besides the extra weight and money, the extensions reduce the clearance for lining the jacks and vehicle lift points up. Especially if you have lift pucks on your car.
Where did you buy your TLX’s?
Why don’t they sell these in Canada?
What was the shipping cost, import duty and taxes?
 
Murray20c8 said:
Have you looked here?

Official QuickJack - Portable Car Lifts for your Garage or Shop

The QuickJack is a portable car lift that's perfect for your home garage or shop. This garage lift makes all your vehicle maintenance simple and convenient.
www.quickjacklift.ca www.quickjacklift.ca
Click to expand...
Screenshot 2024-06-17 at 10.29.19 AM.png
 
Bucketoy said:
Besides the extra weight and money, the extensions reduce the clearance for lining the jacks and vehicle lift points up. Especially if you have lift pucks on your car.
Where did you buy your TLX’s?
Why don’t they sell these in Canada?
What was the shipping cost, import duty and taxes?
Click to expand...
I have lift pucks, and also didnt like the idea of buying a car lift, then have to buy extra parts to make it work. So why not just buy one all intact, that fits my car and SUV's without fussing about with extensions, etc.

I purchased mine on sale at Walmart.com ( link ) (shipped and sold by Bendpak Inc. They shipped it out within 24 hours of purchase)

Free shipping in the USA, I have a shipping depot in Maine I ship too, as I'm only ~1 hour drive away.

So I obviously paid exchange, and when I pick it up, I will be paying 15% HST coming back accross the border on the converted Canadian $ amount, but that is all. No duties or tariffs of any kind.

Shipping it to Canada, would be mega expensive, and you likely would get hit with brokerage fees & lord knows what else.
 
I have the 5000TL. It lines up perfect for my C5 and C6 but not so perfect with the C8. My son is an Audi Mechanic and he does all my work. He says its not problem with the C8 as he just lines it up more towards the rear for the rear weight biased C8. I've never looked at what he uses for a jacking point for the front. I'll ask him.

Paragon springs.jpg
 
vacek said:
I have lift pucks, and also didnt like the idea of buying a car lift, then have to buy extra parts to make it work. So why not just buy one all intact, that fits my car and SUV's without fussing about with extensions, etc.

I purchased mine on sale at Walmart.com ( link ) (shipped and sold by Bendpak Inc. They shipped it out within 24 hours of purchase)

Free shipping in the USA, I have a shipping depot in Maine I ship too, as I'm only ~1 hour drive away.

So I obviously paid exchange, and when I pick it up, I will be paying 15% HST coming back accross the border on the converted Canadian $ amount, but that is all. No duties or tariffs of any kind.

Shipping it to Canada, would be mega expensive, and you likely would get hit with brokerage fees & lord knows what else.
Click to expand...

Thank you for that.

babco.ca in Mississauga say they are the Canadian Distributor of Quick Jacks but they have no TLX with no time frame on getting them 🤷🏻‍♂️.

Unfortunately I have no shipping depot in the US. Not very close to the border either 🤦‍♂️

Hopefully they arrive in Canada this summer.
 
  • Like
Reactions: vacek
Old Thread: Hello . There have been no replies in this thread for at least 100 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Top Bottom