This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

***Not2melo falls victim to the CAM CRAZE ***

Manny@Dasilva

Corvette Specialist
Power User
2 You're 10
Feb 5, 2009
3,183
63
Cambridge
VetteCoins
508
Car
1998 C5 / 2015 Z06
Ah just another late night . Well Mr.not2melo is certainly a little less melo now .

Here is his build :

Melling oil pump
Comp chain
Comp push rods
Comp double spring kit
Comp Cam 226/228 .584/588 114LSA
Edelbrock 2 piece cover
SLP 25% underdrive pulley

top of with some Royal Purple 5W30

How about a few pictures and a little video:










Man it feels like OLDNAVY this season its cams for everyone

More to come folks staytuned

Manny@E.C.P
 
Last edited:
Thanks Manny, its going to be a another great corvette summer!

There was a mistake linking it to Barry's "ly n low" video above, here is the right link for the "Not2melo" video below.

 
Last edited:
Great job as usual Manny...
Did you upgrade the heads as well or leave the stock LS1 heads in? What hp level is expected with this setup?
Looks like I'm going to be the only 1 without a new cam at this years gtg.....
 
Great job as usual Manny...
Did you upgrade the heads as well or leave the stock LS1 heads in? What hp level is expected with this setup?
Looks like I'm going to be the only 1 without a new cam at this years gtg.....

I just have the stock heads right now, had to save some money for new tires and clutch most likely due this summer.
I will be putting on heads hopefully for next spring so the Hp should really start to pickup with a set of AFR or even
Trickflow heads, still not decided what to get yet, maybe even Patriot? Dont know the true Hp numbers without a
tune on the dyno.


I picked up the car from Manny today sounds amazing.

Had it out for a drive this afternoon and the power is noticeable, the stop idle is great that lump, Lump sounds and
feels fantastic in the car. The fiancee was behind me in her car and said she could hear it inside her car with the
windows closed and stereo on! Ah, I just love the sound of the new cam!

Chuck should be able to tune her a bit in May to optimize the tune, put me in Manny for a road or dyno tune.
 
I've got my car in with Manny as I write this. Looking forward to a new cam and as melo put it the "lump lump"!!
 
Manny, change your name to Barry McGuire as in "Car Crazy" only in your cast it's "CAM CRAZY".

I am just not there yet. Feels as though the Surfer has more than enough power for me. Don't need the jitter or the itch just yet as I am still getting myself above water with work and all. Always gotta pay the bills first and keep the lights on.
 
Its close to the VRX3 , its the LG G5X3
Rob and I just warped up we did Kon's 98 vert today for LG pros and tunnel plate as well as some frame savers and an EFI live tune .
Dylans is ready for the cam to be installed as the new springs seals and retainers are already in . Rack is out as is the cam and oil pump . In the morning its go time again , with maybe a video later on Saturday night.
Dam I'm missing the GTG but when your busy you work
Lots of time to play later .

Manny@E.C.P
 
Last edited:
The car is just great after a tune, world of difference.
Does not sound to rough or lumpy at idle, you can tell it has a cam if your
car knowledgable but other then that I think its almost a sleeper cam.
That is until you give it some gas or go WOT, amazing.
Cannot wait for a set of heads to make things flow a bit better
 

Users who are viewing this thread