Chophouse01

I'm New Here
Jun 5, 2016
6
3
Fergus
VetteCoins
500
Car
2001 Z28
Hey All.

Nice to have a Canadian site, happy to have found it!

Breif run down, I have had :
-92 RS 3.1/Auto
-89 RS 5.0/Auto
-88 Formula 5.0/Auto Swaped to 5.7/T5
-88 GTA 5.7/Auto
-98 TA LS1/T56 - Bolt on car

Currently have :
98 Z28
Car was bought as a roller :


Built a cammed LS1, all Brain Tooley valvetrain mated to a T56. Realized too late we used MLS Headgaskets on notched 853 heads and had to pull the motor again to fix the coolant leak this caused. Then I drove it for 1 week and oil pump s**t the bed taking out 4 rod bearings.. was a shitty summer, haha.
Cam Specs :



This happened last Aug.

Since then I picked up a 01 LQ4, had machine shop :
-Install 8 new pistons
-Hone cylinders
-New Cam Bearings
-New Rod and Main Bearings
-Sent cam out and checked out Ok

Picked up Some SS rims and lowering springs. Also have painted SS Hood, just need time to bolt it on the car.
c643b5cb-1cfb-4523-b152-8ec12768c096.jpe
e3ad4819-f308-457e-809f-04a8e0714230.jpe


Got this thing running Saturday and it hauls ass. Needs a proper tune as it was mostly done last year but some fine tuning to be done. Aside from that Im glad shes out!
 
  • Like
Reactions: LSXtasy
Thanks guys. I work at Honda dealer so those pics are from my work, my buddy owns a small shop in town where we did the work.

Car was a 1 owner from a former GM plant worker, 149,000km
 
Thanks guys!

Touch wood car is running great, no leaks and levels are all good. Changing out the break in oil Wed or Thursday and then going to get a proper tune done on Sunday.
 
Old Thread: Hello . There have been no replies in this thread for 100 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Users who are viewing this thread