Dasilva Motorsports 2002 Trans Am ProCharger / LS1 383 Forged Build + T56 stage 3

Manny@Dasilva

Corvette Specialist
Power User
1 You're 10
Joined
Feb 5, 2009
Messages
3,183
Reaction score
63
DasilvaMotorsportBanner2.jpg


Dasilva Motorsports brings you yet another monter build .

jason , brought in his 2002 Trans Am last year for us to install a set of TFS215 cc heads and tune + wheels and tires .
The T/A is back for another round of perfected performance work form the Dasilva crew :canada:

This time around we are going the distance :

Prochargers 8 rib race setup with twin intercoolers
ATi 8 rib crank damper
Alky Control Meth Injection :
T56 level 2 Transmission

20130123_133700.jpg


20130123_133717b-Copy.jpg


20130123_131619.jpg


20130123_131628.jpg


20130123_160921.jpg


20130123_160940.jpg


A new Moser Engineering Chevrolet 12 Bolt, with a nodular case will aslo be going in come spring .
 
Last edited:
very nice jason :coolgleam: to me it's got that evil, bad attitude, that just screams git outta' my way !!! love it !!! :coolgleam: doug.
 
GO - BABY - GO

I should probably takeout the baby seats and the nitrous system
 
I don't know why you would want to take out the Nos, it looks like it fits so well between the baby seats!
 
The engine is back from the machine shop and we have started to assemble it :D

20130208_081541_zpse112809d.jpg


20130208_081532_zps6061365c.jpg
 
DasilvaMotorsportBanner2.jpg


Dasilva Motorsports brings you yet another monter build .

jason , brought in his 2002 Trans Am last year for us to install a set of TFS215 cc heads and tune + wheels and tires .
The T/A is back for another round of perfected performance work form the Dasilva crew :canada:

This time around we are going the distance :

Prochargers 8 rib race setup with twin intercoolers
ATi 8 rib crank damper
Alky Control Meth Injection :
T56 level 2 Transmission

20130123_133700.jpg



A new Moser Engineering Chevrolet 12 Bolt, with a nodular case will aslo be going in come spring .

NICE Wheels!!:D:canada:
 
Manny, I notice that you leave the doors and trunk open even when on jack stands. I assume that is for body flex. Would like to know what you put between the jack stands and the frame so the stands just don't hold it up on one thin cross member (but two instead). Have been thinking of making a portable wooden enclosure that straddles both thin ribs so the stands always support two at the same time/
 

Users who are viewing this thread

Back
Top