Help C8 message display.
- Thread starter AdC822
- Start date
If you have a code reader, check that first to see if you have a code, if you don't have a code, I would disconnect the battery for about 5 minutes, reconnect and recheck.
Have you gone back into the settings to remove the limit?
Are you in "Valet" settings? 2nd key fob?
Did you have the speed monitor set to buzz when you hit a programed speed ? Or did it just randomly pop up ? Go into settings and see if it's set to do so.
- Thread starter
- #6
I'll give that a try.
- Thread starter
- #7
No it just pop up one day.
- Thread starter
- #8
No just pop up.
Disconnecting the battery will remove all your settings. Check the setting first before doing that.
Also, note that when you disconnect the battery you should short both leads together. (Disconnect BOTH leads so as NOT to short the battery!)
Also, note that when you disconnect the battery you should short both leads together. (Disconnect BOTH leads so as NOT to short the battery!)
cdnz
Power User
Just a shot from left field. Battery issue?
Ok, I figured out how to fix it on my car...
