Reply to thread

Reinstall the lower dash in the opposite steps that you used to take it off. Getting the temp sensor back in is the biggest pain in the butt as you have to pull the upper dash back out to get it in while trying to ackwardly install the panel. If you still have issues with the DIC displaying the error codes, let me know, there may be a relay under your BCM that you have to remove then place a jumper wire across a couple terminals to bypass it. If you need this done, I will find out the information for you.


This is a photo of the temperature sensor from the top. You can see how deep it protrudes into the dash and why you have to pull the upper panel out so much. This picture is just FYI.



Back
Top