This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

Abs/traction control module

S

SHAWNCRMR

I'm New Here
2 You're 10
Nov 12, 2010
3
0
Ancaster
VetteCoins
600
Car
2003 zo6
Im new here and after 30 years of owning many many cars, I now own my first Corvette (2003 Zo6) . But Im now having a issue with ABS control module which is no problem to fix thanks to the forums, My question is, is this problem occuring because I have bigger aftermarket wheels and tires? Note; The roll out is at stock specs even though the tire width is wider and the rim size is larger (19x 9.5 frt 20x12 rear)
 
Just to make sure, the overall diameter of the front tires are smaller than the rears, correct? Problems occur when people do not have enough stagger between the two.

As for the larger brakes causing this issue, I have never heard of such a thing but hope that our resident mechanic chimes in on this.

Lastly, post pictures! We'd love to see your car!
 
The ABS units on ther the Vette's are prone to failure , nothing to do with wheel size or brakes . I have fixed a ton of them with factory wheels and brakes . Just a glitch

Thx
Manny@E.C.P
 
dankhts said:
Hey Manny - I need an belt tentioner/pully - mine's all wobbly!! Got 1?
Lemme know and I'll pick it up or stop by...
Click to expand...

Dan with your setup I would go to the Katech one at this time . I don't
have one here , but there are fairly easy to get .

Thx
Manny@E.C.P
 
Thanks for the advice Manny, I just looked into it, seems theirs' is the kind that needs to be manually adjusted, not the spring loaded type that keeps constant tention.... looks nice, billet and all, not sure if I want the maintenance....anything else as good out there?
 
Last edited:

Dan , there is no maintance with that part , just set it and your done

Thx
Manny
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Menu
Log in
Register