This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

Thanks Manny

CCO

Old Timer
2 You're 10
Aug 5, 2011
7,851
108
Cambridge ON
VetteCoins
1,003
Car
2006 vert, 1994 vert
Thanks Manny -- the install was fun tho you wouldn't let me do much....

Very meticulous install.

Love the VaraRams -- and thanks for letting us watch..

Now to start saving for that C/F splitter.

No pics yet will post tomorrow.

Cheers, Colin (and Terry)
 
Sort by date Sort by votes
Pics of VaraRam install at Manny's

As promised -- pics of my install at Manny's shop.

Thanks again Manny ...







An finally one of a screw up this morning : My new baby has a scuff on the front bumper from a metal pipe falling on it and barely scuffing it.

Not happy but oh well -- it could be worse, much worse.
I'm hoping it'll buff out with my Porter Cable, and a little touch up, it should be fine.



Colin.
 
Upvote 0 Downvote
i would only attack this if you have experience with cut polishing. It isn't easy and if you burn the paint, you're screwed. In fact I would take it to someone that can wet sand and polish the whole area for the best results.
 
Upvote 0 Downvote
Thanks, HLN, As you say: 80% is gone with just buffing with an orbital (all but impossible to burn); With a deft hand and some touch-up I can make it 95%...
It's such a small area (about 1"x3") it's now hardly noticeable.
If that's as bad as it gets I figure I got off light.

C.
 
Upvote 0 Downvote
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Menu
Log in
Register