Question Rim Stripes...Install??

frankmp

Regular
C7 Owner
Feb 23, 2009
382
406
Edmonton, AB
1
VetteCoins
4,085
Car
19 Z06 CGM M7
Province / State
Alberta
Anyone install stripes into the groove on z06 rims? Do it by hand using 1/8” 3m tape or this Mr. Groovy 8006 tool by Tapeworks? Anyone have the tool to borrow as I’m having a little trouble spending > $100 just to use once. I kinda of like the look of a red stripe on a black wheel with red calipers........


6E6BB7FB-2D04-466E-87DB-39F3730B3AEA.jpeg
3B6F37D5-C76C-40CA-8FE5-F78A7B37B0B8.jpeg
 
  • Like
Reactions: ccltj and flyboy999

Rruuff Day

Finally!
Staff member
Moderator
Power User
Beta
C7 Owner
HOT Dealer
Aug 30, 2014
6,254
5,921
Pine Lake, Alberta
0
VetteCoins
18,922
Car
C7 3LT ZF1
Province / State
Alberta
I like the look on the black as well.
 

ddgermann

6000 RPM Poster
Power User
Beta
C7 Owner
Jul 1, 2017
3,408
4,752
Edmonton
0
VetteCoins
24,588
Car
2017 3LZ Z06 Z07
Province / State
Alberta
Anyone install stripes into the groove on z06 rims? Do it by hand using 1/8” 3m tape or this Mr. Groovy 8006 tool by Tapeworks? Anyone have the tool to borrow as I’m having a little trouble spending > $100 just to use once. I kinda of like the look of a red stripe on a black wheel with red calipers........


View attachment 23691
View attachment 23692

Took me a while to warm up to the red stripe on my wheels. But now I do like it.

Never knew there was such a tool Frank. Seems like you should be able to have a detail shop put the stripe on for peanuts if they have the tool.
 

frankmp

Regular
C7 Owner
Feb 23, 2009
382
406
Edmonton, AB
1
VetteCoins
4,085
Car
19 Z06 CGM M7
Province / State
Alberta
Maybe I’ll buy the tool and rent out or split cost.. any takers locally:Reddevil:. Guess I could ask a shop and see what they quote. Without the tool heard it’s hard to just “lay in” the tape by hand and keep it perfectly symmetrical........ funny thing they have the 8000 tool for non z06 rims ( without the groove) for cheap......l
 
Last edited:

Hotrodron

Regular
C5 Owner
Nov 4, 2018
165
291
Boston
0
VetteCoins
4,939
Car
2004 Z06
Province / State
USA
Anyone install stripes into the groove on z06 rims? Do it by hand using 1/8” 3m tape or this Mr. Groovy 8006 tool by Tapeworks? Anyone have the tool to borrow as I’m having a little trouble spending > $100 just to use once. I kinda of like the look of a red stripe on a black wheel with red calipers........


View attachment 23691
View attachment 23692
I installed mine myself.I bought some aftermarket C7 wheels without the stripe.IMG_3936.JPGIt does take some patients & a steady hand.I removed each wheel & it made the job easier.
 

frankmp

Regular
C7 Owner
Feb 23, 2009
382
406
Edmonton, AB
1
VetteCoins
4,085
Car
19 Z06 CGM M7
Province / State
Alberta
I installed mine myself.I bought some aftermarket C7 wheels without the stripe.View attachment 23706It does take some patients & a steady hand.I removed each wheel & it made the job easier.
so did you use just 1/8" 3M tape.... and assume it is not into a groove that are on C7z06 rims? Dont know if adding into a groove makes it easier or harder:Confused5:
 
  • Like
Reactions: ccltj and Hotrodron

Hotrodron

Regular
C5 Owner
Nov 4, 2018
165
291
Boston
0
VetteCoins
4,939
Car
2004 Z06
Province / State
USA
so did you use just 1/8" 3M tape.... and assume it is not into a groove that are on C7z06 rims? Dont know if adding into a groove makes it easier or harder:Confused5:
Yes I did use 1/8" 3M tape, & you're right, it's not into a grove.The aftermarket wheels don't have a grove, they have a lip but, I still had to center it on the lip which made it a little difficult.IMG_20190212_171154_hdr.jpg
 
Last edited:
  • Like
Reactions: ccltj and frankmp

frankmp

Regular
C7 Owner
Feb 23, 2009
382
406
Edmonton, AB
1
VetteCoins
4,085
Car
19 Z06 CGM M7
Province / State
Alberta
Got it on my GS cup rims. It’s ridiculous how much GM charges for this I think it’s $750(?)
I like the contrast but unfortunately these stock wheels are coming off 😛

View attachment 23725
NIce!!!...yes GM's are painted on..... thats why the Minion who did it has to get paid that much!
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)