Reply to thread

That's not fibreglass, it's SMC.


SMC is made from a mix of glass, heat activated catalyst and resins. Usually containing epoxy. This is compounded together, then sent to a moulder. The moulder puts this in a high pressure male/female mold and presses it. The heat from this cures the part. Can take as little as a few seconds to large parts taking a minute or two. Repairing this type of part needs to be done with epoxy resins.

You can use SMC repair on fibreglass but not fibreglass repair on SMC. The SMC repair actually works better on fibreglass .


You'll obviously need to order up two new body mount replacements.


Back
Top