This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

ECP -The latest builds

Manny@Dasilva

Corvette Specialist
Power User
2 You're 10
Feb 5, 2009
3,183
63
Cambridge
VetteCoins
508
Car
1998 C5 / 2015 Z06
Its been crazy busy the last while , so I have not had the time to even post up .

Here are a few pics and some video from a few of our lastest bulids.

John's 04 C5 Vert.
( VRX3 cam package , front lip spoiler , clear corners , SS brake lines ,+++)







Davor's 07 C6 Vert .
( Full DSV leather & carbon interior , HUD installed . 08 NPP exhaust + NPP controller , new front nose and plate holder , HID lighting +++)



















More in post #2
 
POST #2 0n ECP

Post #2 from ECP current builds.

Doug's 09 CTSV Super Charged .
( ARH headers , 160 stat , Corsa exhaust , Hennessy CAI , Custom ECM & TCM tune )

Let get it started




Just a little size difference










Sound killer


Ok here's a good one , my buddy (Zweapon) once had a cam installed by a joker in town here . Well a misfire has plagued him for sometime . I had Kevin at Champion retune it and he discovered a broken 921 spring . Broken becuase the so called LS1 tech put shims under the springs . When I went to change the springs and I found yet another broken spring . This is what happens when you let a JR tech install a cam





Last but not least , had a little time to install my new Jesel Rockers .

Before ( Yella Terra's )


After ( Jesel Sportman's )


More to come ..... We have a couple of SC builds and a few more cam cars on the go right now , as well as more , more ...well just more

Thanks to everyone for all your support .
 
Last edited:
Jutskin said:
hey Manny, Nice looking work on the cars.
did you get any numbers on the V after the mods?
Click to expand...

Not yet , he dynoed 450 at the wheels before the mods . Once he gets a dyno done again , I will post up the results.
 
Nasty98 said:
Hey Dan , had a great time on the SS Minnow on Sunday , thx for having us aboard
Click to expand...

stop around there anytime, you're always welcome, next time I won't make you row! Bring Nasty1 to the vette show in Dover and we can hook up again!

BTW - I see Rob managed to work his way into yet another pic! What a camera hog!
 
Nasty98 said:
Not yet , he dynoed 450 at the wheels before the mods . Once he gets a dyno done again , I will post up the results.
Click to expand...

Is it a stick car? Mine's an auto so the wife can drive when I have had a few cocktails. Last V I had was a stick and it meant no cocktails...not :coolgleam:.
Thanx for your quick response.
:seeya:
 
Jutskin said:
Is it a stick car? Mine's an auto so the wife can drive when I have had a few cocktails. Last V I had was a stick and it meant no cocktails...not :coolgleam:.
Thanx for your quick response.
:seeya:
Click to expand...

It's an auto , bring on the cocktails
 
So more

How about a few more

Friday night Steve's 06 , custom leather and carbon interior






Friday as well , Dan Filinski's 99 , complete Pfadt bushing upgrade with Pfadt engine mounts and Pfadt rear diff brace.









I think Dan approves


A couple of other ones including Garys 06 A6 , that we installed a VRX2 ECP cam kit and a 2800-3000 stall making 389RWHP & 360 TQ

I will get some pic's of and a video up later this week on Garys car.

A couple pics of the NASTY1 , just had to post these





Ok off to bed , another busy day tomorrow
 
Last edited:
WildWilly55 said:
Auta-boy Manual!!!! Great work---keep the pictures com'n!!!!:coolgleam:
Click to expand...

Here ya go Willy

Steve's 08 gets some new Katech carbon fiber valve covers & new HRE Mono block wheels with Nitto NT05's







The 07 get the same covers ( sorry no pic ) and some more exterior carbon









Lots more to come .

At ECP there are no limits
 
CCO said:
Nice to chat today Manny -- lookin' forward to hookin' up with my new ride next week and talkin' mods.

Cheers,
Colin (CCO)
Click to expand...

Looking forward to seeing that 2011 GS , and doing some mods for you .
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Menu
Log in
Register