Choke spring/rod needed

[carman]

I need a thermostatic choke spring and rod assembly.
I have a 1967 327 corvette with a non original cast iron 4-barrell spread bore intake, casting # 3905393. The carburetor is a new 650 cfm Holley spread bore with mechanical secondaries, List # 6853. The choke spring/rod linkage on this carb is designed to

 

[buckhorn76]

is that a 4165 series carb ?

 

[buckhorn76]

still need info carman ???

 

[Keith Tedford]

I put a 4165 on a truck many year ago and I believe I used the factory coil and rod. The rods can be made out of coat hangers very easily.

 

[buckhorn76]

ok just in case carman still needs to know. your manifold is the o.e.m. iron piece used on the 67 camaro 327/350. you need the o.e.m. style divorced choke to work with the 4165 carb. you might want to look at edelbrock part # 1931. you may also want to check carbsunlimited - divorced choke electric conversion, part # cu444.