Chevrolet's 2021 Corvette Build and Price is now live on GM.CA

I couldn't see FE2 either and that was the one I was looking to see. I am thinking this might be one of the downsides to no price increases.
 
Thoughts on this build?
Good or bad comments welcome
3LT. Z51 MAGNETIC RIDE. FRONT LIFT
CERAMIC GRAY WITH SILVER STRIP
WILL GET BASE RIMS AND ORDER AFTERMARKET FLAT BLACK RIMS
 

Attachments

  • Screenshot_20201223-115038.jpg
    Screenshot_20201223-115038.jpg
    142.8 KB · Views: 33
  • Screenshot_20201223-112640.jpg
    Screenshot_20201223-112640.jpg
    137.2 KB · Views: 33
Thoughts on this build?
Good or bad comments welcome
3LT. Z51 MAGNETIC RIDE. FRONT LIFT
CERAMIC GRAY WITH SILVER STRIP
WILL GET BASE RIMS AND ORDER AFTERMARKET FLAT BLACK RIMS
You did not want to try the Silver Flare Metallic...you could save 1000$ and put it towards two tone seats...sky cool grey and black.
 
My initial thought was that you should have a BLACK stripe, but now that I have looked at your photos, I think the grey is the perfect match! What is your choice for interior colour?

3 levels of black/grey/ silver stripes
My son wanted black. I thought the contrast of silver was nice
Was going all black interior. Thoughts? Stitching? Seatbelts? 2 tone?
 

Attachments

  • 5FBC0B48-0C66-4C5A-BD00-A041073090CB.png
    5FBC0B48-0C66-4C5A-BD00-A041073090CB.png
    780.7 KB · Views: 24
  • 755C73F4-7C5F-45BD-9B2D-F48EA65E6D37.png
    755C73F4-7C5F-45BD-9B2D-F48EA65E6D37.png
    777.9 KB · Views: 18
  • CA2B966C-510E-4239-A610-0594AB350D92.png
    CA2B966C-510E-4239-A610-0594AB350D92.png
    759.6 KB · Views: 26
2 tone seats with black seat belt
View attachment 75339

That has my vote but I'm biased since that matches my Blade Silver C8 interior. You have to decide your preference "nialll": maintain the black/white theme with the 2-tone grey/black seats (which bumps you to a GT2 seat) and then you'll be cleaning the light grey edges more often when they get discoloured from people rubbing their edges...or avoid the edge wear & tear/"dirt" issue with all black...or I've seen others with the exterior silver colour go with 2-tone red/black seats which looks great too, but adds another colour so perhaps you don't want to go there. Decisions, decisions...

I struggled a LONG time, as many did, with colour choices. But I finally realized that almost everything looks good since the car itself looks great. Once I understood that, it made things easier for me. But that's just me and everyone's different. I don't think you can go wrong with whatever choice you make. Good luck!
 
Well, I am going in today to firm up my order (deposit given in the middle of Sept). Was going to go with the FE2 option but have made the move to Z51 so not an issue but thanks for confirming the option is possible in Canada. Let me know what you think. I am doing this car with my 75-year-old father so we needed to compromise in a few areas to make sure we both could live with it.

2021 Convertible
3LT
(GSJ) Silver Flare Metallic
(HU1) Sky Cool Grey, Napa leather seating surfaces with perforated inserts
(TU7) Two-tone seats
Z51 PERFORMANCE PACKAGE
(D84) Carbon Flash-painted nacelles and roof - convertible hardtop
(E60) Front lift with memory
(FE4) Z51 performance suspension with Magnetic Selective Ride Control
(Q8Q) 19" front/ 20" rear 5-open-spoke Carbon Flash-painted aluminum wheels with machined edge $1,295
(ZYC ) Carbon Flash Metallic-painted outside mirrors
 

Attachments

  • Side 1.JPG
    Side 1.JPG
    95.2 KB · Views: 14
  • Back1.JPG
    Back1.JPG
    103.7 KB · Views: 16
Looks very nice! The only word of caution is that the light coloured seats show marks very easily. I have the natural seats and just getting in and out leaves marks on the side bolsters. They come out pretty easily with leather cleaner though. I haven't sat in the car with jeans yet so no idea about the blue stains and how easy they are to remove. That being said, I have no regrets with my interior colour choice, and if you're happy with yours then I doubt you will regret it. The front lift is amazing!
 

Users who are viewing this thread

Back
Top