Cam install

[mcgratten]

Does anyone here do cam installs on the side for cash? Have a cam, rockers, springs and pushrods to go in.

Rob

 

[Red76]

better performance if you put them IN the engine instead of on the side...

 

[HLN A55]

I put mine on the side... now all i need is a park bench for a spoiler and i'll all set!!!

 

[HLN A55]

Does anyone here do cam installs on the side for cash? Have a cam, rockers, springs and pushrods to go in.

Rob

Nice car if I do say so myself :coolgleam:

 

[AlbertaZ06]

If you have a garage do it your self. LS1Howto.com. I did mine its a good winter project. Not as bad as it looks

 

[mcgratten]

If you have a garage do it your self. LS1Howto.com. I did mine its a good winter project. Not as bad as it looks

How did it run at first without a tune? Just may tackle it... done many cams on the old 350's, have never touched any of the newer stuff.

Rob

 

[AlbertaZ06]

It ran good but didn't idle to well. It would stall sometimes when clutching coming up to a red light or stop sign. I drove for 2 weeks with out a tune and just took it easy. same idea as cam installs on the old 350's but being a roller there no break in like the old cams. just keep the rpms below 3000 untill it warms up for the harder valve springs