Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Those rear brake cooling ducts they installed during PDI, when they weren't supposed to. I think the PDI even says leave them in the trunk, for Z51, Z06, and E-Ray. Do not install during PDI.Need them off, in case I ever have to drive it in less than ideal conditions. I don't want to scoop up leaves, road debris, road kill, whatever into the brake rotors and calipers. I can remove the upper and lower pieces that attach to the lower control arm, the "scoops" if you will, with a 7mm and 8mm socket drives and a battery powered drill. I need about 6 more inches of clearance under the rear end.Low profile ramps will do it.
Those rear brake cooling ducts they installed during PDI, when they weren't supposed to. I think the PDI even says leave them in the trunk, for Z51, Z06, and E-Ray. Do not install during PDI.
Need them off, in case I ever have to drive it in less than ideal conditions. I don't want to scoop up leaves, road debris, road kill, whatever into the brake rotors and calipers. I can remove the upper and lower pieces that attach to the lower control arm, the "scoops" if you will, with a 7mm and 8mm socket drives and a battery powered drill. I need about 6 more inches of clearance under the rear end.
Low profile ramps will do it.
