Aug 24, 2022
52
41
VetteCoins
1,528
Car
2021 c8 corvette
Province
ON
Hi, I recently installed Paragon Lowering Collars and noticed that the right side is 1/4" lower than the left side. I was talking with the technicians at Paragon and they stated:

Per talking to our on staff engineer & master technician, they stated:
Most cars are not perfectly level side to side or front to back to account for factory weight distribution & or could be normal to account for the driver weight when driving / racing. We measured both of our shop c8's four corners and both cars have different measurements from side to side & from one another.

I'm not sure if you guys that have installed the Paragon Lowering Collars ever measured or noticed one side higher than the other?

Would you guys mind checking the height of the car on both sides from the floor to the underside of wheel well, as shown in the picture below.

Thanks
 

Attachments

  • 301543758_1727578744280480_8331543846938508444_n.jpg
    301543758_1727578744280480_8331543846938508444_n.jpg
    166.5 KB · Views: 391
Old Thread: Hello . There have been no replies in this thread for 100 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Users who are viewing this thread