Bellville Springs

[JSH]

Hi all, and a HAPPY NEW YEARS to all. Presently working on a 342 differential rebuild, and cannot seem to find any Belleville springs anywhere. Was wondering if any of you have some connections on where I could find them. Have spent hours looking. Preferably C6 springs. Any help would be appreciated.

 

[1st Vette]

Hi all, and a HAPPY NEW YEARS to all. Presently working on a 342 differential rebuild, and cannot seem to find any Belleville springs anywhere. Was wondering if any of you have some connections on where I could find them. Have spent hours looking. Preferably C6 springs. Any help would be appreciated.

Don’t know if this will be of any help but it sure gives a lot of info on c5 and c6 suspension.

C5/C6 Corvette Suspension Tech: Coilovers vs. Leafs - LSX Magazine

Leaf springs and coil over shocks both have their benefits in suspending the chassis of our Corvettes, but which one should we use for our style of driving?

www.lsxmag.com

 

[OL Yeller]

Couldn't have you just purchased the complete center section and just drop it in the housing? seems counter productive to be buying each piece seperately.

 

[1st Vette]

Don’t know if this will be of any help but it sure gives a lot of info on c5 and c6 suspension.

C5/C6 Corvette Suspension Tech: Coilovers vs. Leafs - LSX Magazine

Leaf springs and coil over shocks both have their benefits in suspending the chassis of our Corvettes, but which one should we use for our style of driving?

www.lsxmag.com

How about this?

Home - Key Bellevilles

We specialize in the design, manufacture, and distribution of high quality belleville disc springs servicing customers worldwide.

keybellevilles.com

 

[jwl300]

Is this what you want????

Disc Spring Washers - washers - Washers, Spacers, Shims, Rings, Bushings, & Seals - Fasteners & Products

www.spaenaur.com

 

[JSH]

Couldn't have you just purchased the complete center section and just drop it in the housing? seems counter productive to be buying each piece seperately.

Iam trying to keep my cost down, have the whole 342 differential which is going into my 99 which has 273,s at the present time. Would like to replace the clutches and the 2 thrust washers, plus seal kit. bearings and gears are all good.