Brett

Casual User
Apr 30, 2017
22
6
Calgary
VetteCoins
619
Car
Corvette 1981
Is there anyone in Calgary who does 4 wheel alignments on a 1981? I would imagine Western does it but I've never used them or heard anything about them?

Thanks, Brett

Mine has a slight pull to the right and a vibration that I can't get rid of, replaced all the U-joints, both back axles and bearings (set end float at 0.002") had the wheel balance checked and re-packed the front bearings
 
Most Tire Shops and/or Dealers can do 4 wheel alignments. But one thing to watch for is the length of the C3 nose can be a problem for some Alignment Machines, as they do not have long enough arms or offsets to be able to "see" around the nose.
The last alignment I had done on My 75 was at a Chrysler Dealer that used an offset arm to "see" under the nose
 
  • Like
Reactions: ddgermann
Old Thread: Hello . There have been no replies in this thread for 100 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Users who are viewing this thread