2M Fabrication Sport cats 200

[manofwar]

I was thinking on ordering a set of sport cats from 2M Fabrication. I haven't heard much about them, but the prices are reasonable VS Fabspeed & Paragon. Does anyone have any feedback about this company and quality of their parts?

2020+ C8 Corvette Sport Cats

Before ordering, you MUST read our FAQ page by clicking here. 2020+ C8 Corvette Sport Catalytic Converters. Same core catalyst materials used by...

shop.2mfabrication.com

 

[Gilles27]

Raccoon, Sparro and I all have them on our cars, best bang for the buck but customer service is terrible

 

[Flightlevels]

I have them on mine too. Not over the top obnoxious loud but just right imho. I opted for the Kevlar wraps and western corvette here in YYC installed for me. A nice throaty sound with the valves open. Recommended.

 

[manofwar]

Great, I'll place the order today....

 

[Flightlevels]

In addition - they don’t trigger any CEL (check engine light)

 

[manofwar]

I must say they are quick shipping the items out, within 4 hours after ordering I received a confirmation Email that the item has been shipped.. I also ordered the header gasket.

Do I need another gasket for the other end ?

 

[Flightlevels]

Not that I’m aware of. (I got those too if I recall correctly) Interestingly enough the original cats had a couple broken studs. The new ones from 2M are more robust the fellas were saying.
Cheers

 

[Gilles27]

I ordered 3 GM metal gaskets they cost $12 each

 

[Jack Raccoon!]

I have them on mine too. Not over the top obnoxious loud but just right imho. I opted for the Kevlar wraps and western corvette here in YYC installed for me. A nice throaty sound with the valves open. Recommended.

You must not be driving your car properly. My car is obnoxiously obnoxious. Sparro's is obscene and Gilles27's is retarded...

 

[Flightlevels]

Oh I drive it! Not as loud as the full exhaust on my buds. Best part is the snap through the gears and some nice popping on a quick downshift. 👍

 

[manofwar]

Can't wait to install the 200 cell cats, she needs some attitude.
I was looking at this heat shield what do you guys think.................

https://www.summitracing.com/parts/hsp-177094?seid=srese1&gclid=EAIaIQobChMInOjJ8sCD-gIVzMezCh1oBgX6EAsYBiABEgLpcfD_BwE

 

[Jack Raccoon!]

I have no heat shields, no blankies, no issues...

 

[Murray20c8]

I have no blankies...

That's not what I heard~

 

[Jack Raccoon!]

I'm a fetal position guy....

 

[Rruuff Day]

Intoxication does that to you Jack....

 

[Gilles27]

Can't wait to install the 200 cell cats, she needs some attitude.
I was looking at this heat shield what do you guys think.................

https://www.summitracing.com/parts/hsp-177094?seid=srese1&gclid=EAIaIQobChMInOjJ8sCD-gIVzMezCh1oBgX6EAsYBiABEgLpcfD_BwE

Not required but 2M also sells them cheaper

 

[manofwar]

I looked, 2M is selling the heat shield for $279.99US................The heat shield posted below sells for $53.75 CAD

 

[Gilles27]

I looked, 2M is selling the heat shield for $279.99US................The heat shield posted below sells for $53.75 CAD

You can put that on but not really required the first sets that us 3 Amigos ( Sparro, Jack and I) got where ceramic coated from 2M, they now have heat shields tacked on the newer versions but no coating

 

[manofwar]

Hi guys I received my 2M fabrication 200 cats and had a few questions about the installation .
Does the exhaust & bumper have to be removed to install them ???
I also have my second oil change appointment in October, would the GM dealership void my warranty if they hear and see aftermarket cats ????????
Before dismantling the cats, what gaskets would I need??
2M Fabrication charged me 65$ US for 2 cheap triangle paper like gaskets that I'm not going to use due to them cracking.




.

 

[Jack Raccoon!]

You don't have to take the bumper off or remove the exhaust. You probably will have to take out the trunk liner and remove the cover. The air box may or may not have to be removed depending how agile you are. Can't help you with the gaskets, wasn't charged for any and I cut a cheque for install....